in testing a crossover cable can you say that the blinking lights are in order or not
1. in testing a crossover cable can you say that the blinking lights are in order or not
Answer:
When you crossover plant your foot in the opposite of the deffender and go to another side
There you go you can crossover.
2. what is crossover in a basketball
Answer:
A crossover dribble is a basketball maneuver in which a player dribbling the ball switches the ball rapidly from one hand to the other, to make a change in direction. In a typical example the player heads upcourt, dribbling the ball in the left hand, then makes a wide step left with a good head fake.
Explanation:
SANA MAKATULONG PI:)
3. Crossover Footwork Pattern
Answer:
Crossover FootworkAs the name suggests, your legs cross over each other for you to reach and catch the oncoming ball at a faster pace. To move from the backhand side to the wide forehand side, you cross your leg foot wide to the right side. Then using the left foot as a pivot, shift your weight to your left foot.
Explanation:
pa Brainliest po :)
4. what is the meaning of Crossover cable
Answer:
A crossover cable is a type of twisted pair copper wire cable for LANs (local area network) in which the wires on the cable are crossed over so that the receive signal pins on the RJ-45 connector on one end are connected to the transmit signal pins on the RJ-45 connector on the other endExplanation:
markmebrainlest
#carryonlearning
Answer:
what is the meaning of Crossover cable
5. identify the steps in creating crossover cable to
1. Find a standard Ethernet cable you don't use for anything.
2. Towards one end of the cable, cut open a slit a few inches long.
3. Peel back and remove the cable casing.
4. Cut the green, orange, white-green and the white-orange.
5. With the wires cut, work now one-by-one.
6. On Side "A" we will call it, connect the green stripped end to the orange stripped end on Side "B".
7. You now have one step of your crossover wire completed.
8. Just as we connected the orange and green wires for one side of our crossover cable, lets now repeat the process with the final two wires.
9. On Side "A", join the green-white wire to the orange-white wire on Side "B".
10. Join the remaining wires.
11. Clean the cable up.
12. Admire your new, home made crossover cable!
6. When to use a crossover cable? *
Answer:
1.Connecting a computer to a computer.
2.Connecting a router to a router.
3.Connecting a switch to a switch.
4.Connecting a hub to a hub and.
5.Connecting a router to a PC because both devices have the same components.
Explanation:
hope it help
mark me a brainlist answer
7. how to improve crossover in basketball brainly
Answer:
Steps
1. Develop your dribble. Before you attempt a crossover, make sure you've got a good handle on power dribbling and can maintain good ball control. ...
2. Fake to your dominant side. To do an accurate-looking fake, push the ball to the side you're dribbling it in. ...
3. Hesitate. ...
4. Stay low and wide. ...
5. Cross the ball over.
Explanation:
Hope it helps
8. what are the colors and label of Crossover Cable ?
Answer:
Good eveningGreen – used for crossover ethernet connections. Yellow – used for POE connections. Orange – used for analog non-ethernet connections. Purple – used for digital non-ethernet connections
Explanation:
Hope it helps Thank you
Answer:
Green – used for crossover ethernet connections.
Yellow – used for POE connections.
Orange – used for analog non-ethernet connections.
9. how to perform crossover cable
Answer:
Simply make one end of the cable T568A and the other end T568B for crossover cables. You may now manufacture Ethernet cables of any length, as well as repair broken connectors and construct a crossover cable. Have fun crimping
==================================
How to Perform Crossover CableStep 1: Strip the cable jacket about 1.5 inch down from the end.Step 2: Spread the four pairs of twisted wire apart. For Cat 5e, you can use the pull string to strip the jacket farther down if you need to, then cut the pull string. Cat 6 cables have a spine that will also need to be cut.Step 3: Untwist the wire pairs and neatly align them in the T568B orientation. Be sure not to untwist them any farther down the cable than where the jacket begins; we want to leave as much of the cable twisted as possible.Step 4: Cut the wires as straight as possible, about 0.5 inch above the end of the jacket.Step 5: Carefully insert the wires all the way into the modular connector, making sure that each wire passes through the appropriate guides inside the connector.Step 6: Push the connector inside the crimping tool and squeeze the crimper all the way down.Step 7: Repeat steps 1-6 for the other end of the cable.Step 8: To make sure you've successfully terminated each end of the cable, use a cable tester to test each pin.[CTTRO]Welcome:)
10. What is the significance of crossover in between homologous pairs?
Explanation:
During meiosis, homologous chromosomes undergo a reciprocal exchange of DNA to generate crossovers. Meiotic crossovers create physical connections between homologous chromosomes that are necessary for proper segregation at the first meiotic division, and also generate new combinations of alleles
11. what are some similarities of straight and crossover cable ?
Answer: Straight-through Ethernet cables are the most commonly used. Crossover cables use two different wiring standards: one end uses the T568A wiring standard, and the other end uses the T568B wiring standard. ... For example, a computer with Auto MDI-X can use either a straight-through or crossover cable for any application.
Explanation: hope it help you uwu
12. what are the colors and label of Crossover Cable ?
Answer:
Green – used for crossover ethernet connections. Yellow – used for POE connections. Orange – used for analog non-ethernet connections. Purple – used for digital non-ethernet connections
Explanation:
hope it helps
13. explain crossover cable configuration
Answer:
A crossover cable is generally implemented on a twisted pair cable that consists of four pairs of cables. For crossover cable to work, both ends should follow the same wiring format. The reversing or swapping of cables varies, depending on the different network environments and devices in use.
14. what is definition of crossover cable computer networking
Answer:
A crossover cable is generally implemented on a twisted pair cable that consists of four pairs of cables. For crossover cable to work, both ends should follow the same wiring format.
The reversing or swapping of cables varies, depending on the different network environments and devices in use. For example, in a 100BaseTX network, the second and third pair must be swapped at each end to create a crossover cable. A crossover cable is also used to create mesh networks that work without an intermediate network device, such as a hub or switch.
Examples of crossover cables are null modem cables, rollover cables and loopbacks.
15. Basketball dribbling crossover introduction
STEP RIGHT OR LEFT FOOT
16. Crossover Footwork Pattern
Answer:
As the name suggests, your legs cross over each other for you to reach and catch the oncoming ball at a faster pace. To move from the backhand side to the wide forehand side, you cross your leg foot wide to the right side. Then using the left foot as a pivot, shift your weight to your left foot.
pa brainliest
Answer:
sorry Po di ko Po alam
sasusunod Po bawi nalang
17. how to improve crossover in basketball
Answer:
Practice practice practice.
18. what is the similarity of straight through and crossover cable connection
Answer:
HELLO :DThe cable used for both the straight through and crossover formats is exactly the same.
When you connect two devices of different types together, you use a straight through cable. When you connect two devices of the same type together, you use a crossover cable. All cables are straight through if you insert a network device between two devices of the same kind.
The difference between straight through and crossover cable is that in the crossover configuration the color-covered wires that stick out from the frayed ends of the cable are wired into the plug differently at one end
Explanation:
hope it helps
#CarryonLearning19. 3. a. drive b. receive C. serve 4. a. basic Sideways B. crossover C. in and out 5. a. basic Sideways B. crossover C. in and out
Answer:
C
A
B
Explanation:
comment if I'm wrong
Answer:
MGA KASAGUTAN
1. B
2.C
EXPLANATION
1.RECIEVE AND OUT
2.IN AND OUT THE PING PONG
20. what is the importance of making a crossover ethernet cable?
Answer:
An Ethernet crossover cable is a crossover cable for Ethernet used to connect computing devices together directly. It is most often used to connect two devices of the same type, e.g. two computers (via their network interface controllers) or two switches to each other.
Explanation:
sana po makatulong ❤️
21. what is the iportance of a crossover cable
Answer:
Crossover Cable Definition
Its purpose is to allow the direct connection of two LAN devices, such as two hubs, two switches or a hub and a switch. It can also be used to create a direct connection between two computers. An alternative to using a crossover cable is to use a hub or switch that has an uplink port.
Answer:
Its purpose is to allow the direct connection of two LAN devices, such as two hubs, two switches or a hub and a switch. It can also be used to create a direct connection between two computers. An alternative to using a crossover cable is to use a hub or switch that has an uplink port.
Explanation:
22. step by step UTP cable termination in crossover
Answer:
di ko po naintindihan ang tanong kaya sorry
Explanation:
salamat po sa points at pa barainliest na rin po para maka vertouso na ko
23. 1. My grandfather is a crossover who voted for the opponent of the party where he belongs, What word in the sentence is unfamiliar? What words in the sentence give hints to the meaning of the crossover?
Answer:
CROSSOVER. AND the words in the sentence hive hints to the meaning of the crossover Is OPPONENT
Explanation:
I HOPE THIS CAN HELP YOU MATE.
GODBLESS
24. it is the crossover or combination of materials to form contemporary artworks
Answer:
Hybridization
Explanation:
crossover or combination of material s to form contemporary art works
25. enumerate the wire color of crossover configuration in order
Answer:
A crossover has one end with the Orange set of wires switched with the Green set. Odd numbered pins are always striped, even numbered pins are always solid colored. Looking at the RJ-45 with the clip facing away from you, Brown is always on the right, and pin 1 is on the left.
26. how to improve crossover in basketball
Answer:
just practice┌(・。・)┘♪
Explanation:
#carryonlearning(◍•ᴗ•◍)
Develop your dribble. Before you attempt a crossover, make sure you've got a good handle on power dribbling and can maintain good ball control. A good crossover requires that you dribble effectively with both hands and can drive the lane from either direction.2 Fake to your dominant side. To do an accurate-looking fake, push the ball to the side you're dribbling it in. Step the way you fake, and lean that way, too. Keep your eyes focused on the defender's hips and midsection, rather than the hands or legs, which the defense will use for distraction.
Also consider faking to your non-dominant side and crossing back over to your dominant hand and driving from your strong side. Keep the D guessing.
3 Hesitate. This is the most important and convincing part of the crossover dribble.
Watch videos of great crossover players to practice
4 Stay low and wide. Since the move involves bouncing the ball in between you and the defender, you'll want to make sure that you're low to the ground and that you're leading with the foot on your dominant side.
5Don't look at the ball as you're doing the move. Keep your eyes on the defender and up-cour,
27. Crossover Footwork Pattern
Answer:
As the name suggests, your legs cross over each other for you to reach and catch the oncoming ball at a faster pace. To move from the backhand side to the wide forehand side, you cross your leg foot wide to the right side. Then using the left foot as a pivot, shift your weight to your left foot.
Explanation:
pa brainliest po
28. what is crossover cable?
Answer:
An Ethernet crossover cable is a crossover cable for Ethernet used to connect computing devices together directly. It is most often used to connect two devices of the same type, e.g. two computers or two switches to each other.
Answer:
A crossover cable is a type of cable installation that is used for the interconnection of two similar devices. It is enabled by reversing the transmission and receiving pins at both ends, so that output from one computer becomes input to the other, and vice versa.
Explanation:
29. what does it mean by "crossover"performance?
Answer:
The crossover is a point on the trading chart in which a security's price and a technical indicator line intersect, or when two indicators themselves cross. Crossovers are used to estimate the performance of a financial instrument and to predict coming changes in trend, such as reversals or breakouts.
30. Steps in making crossover network.
Answer:
Crossover cable Steps
Step 1: Strip the cable jacket about 1.5 inch down from the end.
Step 2: Spread the four pairs of twisted wire apart. ...
Step 3: Untwist the wire pairs and neatly align them in the T568B orientation. ...
Step 4: Cut the wires as straight as possible, about 0.5 inch above the end of the jacket.
Explanation: Hope it helps
Step 1: Strip the cable jacket about 1.5 inch down from the end.
Step 2: Spread the four pairs of twisted wire apart. ...
Step 3: Untwist the wire pairs and neatly align them in the T568B orientation. ...
Step 4: Cut the wires as straight as possible, about 0.5 inch above the end of the jacket.
